Week 14
4/18/2016 - 4/22/2016:
1. Video of your RG group setup.
Below is a video of our group RG setup.
Below is a video of our group RG setup.
Video 1: This is a video our of group RG machine set up.
2. Video of your RG group in action
a. Failed attempt
Below is a video of our RG machine failing. We ran into some issues with the way the dominoes were set up and a mousetrap was being difficult.
Video 2: This is a video of our RG machine experiencing some technical difficulties.
b. Successful attempt
Below is a video of our RG machine working properly. Hopefully it works this smoothly every time!
Below is a video of our RG machine working properly. Hopefully it works this smoothly every time!
Video 3: This is a video of our RG machine working as intended.
Great job describing how your RG setup works as a group, Adam! Hopefully there's no domino or mouse trap issue when the whole class goes!
ReplyDeleteI hope so too!
DeleteThe setup is looking good, nice to see you were able to work out the bugs you were having a few weeks ago. I am curios though what is the purpose of the dominoes that split off from the main path and double back to your motor?
ReplyDeletePer Dr. Kaya I needed to have a way to stop the motor, the dominoes provide enough resistance to stop the motor from spinning.
DeleteGood job explaining the setup as a group. Hopefully all goes well when we do the class setup again on Wednesday!
ReplyDeleteI hope it goes well too!
DeleteVery clear explanation, good job! Glad to see that most problems you met before have been solved, and the circuit looks pretty good right now. Good luck on the class demo!
ReplyDelete--Yao
Looks like you guys are ready for Wednesday. I noticed the dominos back-tracking to your motor, that just to turn the motor off, right? If it is, how does that work? How do those dominos end up turning that motor off? –Andrew
ReplyDeleteThe dominoes provide enough resistance to prevent the motor from turning, it doesn't exactly turn it off, but there is no more movement.
DeleteLooks looks like you guys have your bugs worked out, should be ready to go on Wednesday.
ReplyDelete-Matt
Nice job guys, the set up looks good. Haowens circuit and setup looks like that might have taken a decent amount of time with setting up all the various parts.
ReplyDelete